Novum MOF 02 is a high‑performance 15% glass‑fiber and 5% molybdenum disulfide filled PTFE compound, engineered by ISMAT to provide excellent wear resistance, higher stiffness and lower deformation under load while retaining the inherent chemical inertness and broad temperature capability of PTFE. With operating temperatures from –200°C to +260°C, Novum MOF 02 offers improved mechanical strength, higher elongation and higher dielectric strength compared to unfilled PTFE, along with better fatigue performance and smoother tribological behavior. This balanced‑modulus compound is ideal for high‑wear, moderate‑to‑high‑load applications such as valve seats, joint seals, backup rings and other critical sealing components where dimensional stability, long‑term reliability and consistent electrical insulation are essential.

Material Data - Novum MOF 02

Novum MOF 02 is a high‑performance PTFE‑based engineering plastic engineered by ISMAT using 15% glass fiber and 5% molybdenum disulfide filler, meticulously compounded for demanding sealing applications that require a balance of strength, wear resistance and moldability. Engineered with top‑grade raw materials and non‑free‑flow molding‑grade resin, Novum MOF 02 combines enhanced mechanical strength with lower deformation under load, making it ideal for critical sealing components that must perform reliably under high pressure and extreme temperatures from –200°C to +260°C.

As a reinforced PTFE grade, Novum MOF 02 delivers higher hardness (Shore D 60 ± 5) and a minimum tensile strength of 14 MPa, while maintaining good elongation (≥150%) and higher dielectric strength compared to standard PTFE compounds. Its enhanced tribological properties – reduced friction against mating surfaces and improved fatigue performance ensure longer service life in high‑cycle applications such as valve seats, joint seals and backup rings. The material also exhibits stable density (≥2.25 g/cm³), low creep and dimensional stability under continuous load, making Novum MOF 02 one of the preferred high‑performance plastics for high‑wear, high‑load industrial sealing environments.

By choosing Novum MOF 02, industries benefit from a lightweight, corrosion‑resistant engineering plastic that outperforms many conventional sealing materials in terms of mechanical strength, wear resistance and electrical insulation. Whether used in oil & gas, chemical processing or power generation, Novum MOF 02 is designed to deliver long‑lasting, reliable performance where dimensional stability, low‑friction behavior and consistent electrical properties are critical requirements.

ISMAT leverages Novum MOF 02, a 15% glass‑fiber and 5% molybdenum disulfide filled PTFE compound, to produce high‑performance joint seals, backup rings, valve seats and other PTFE‑based seals designed for high‑wear and high‑load industrial applications. With a hardness of 60 ± 5 Shore D, minimum tensile strength of 14 MPa, elongation ≥150% and an operating temperature range from –200°C to +260°C, Novum MOF 02 components offer lower deformation under load, higher elongation, higher dielectric strength and better fatigue performance compared to standard PTFE grades. These reinforced PTFE parts deliver robust mechanical reliability and long‑term sealing performance in critical oil & gas, chemical processing and power generation systems, where dimensional stability and wear‑resistant behavior are essential.