Novum P 02 is a virgin PTFE compression molding grade developed by ISMAT for sealing components that carry high loads. Its non free flow resin offers low mold shrinkage and good flow, so molded parts hold their shape and fill the mold cleanly. Good weldability, good electrical and mechanical properties and an operating range of -250°C to +250°C make it a dependable material for joint seals, backup rings, valve seats and seals across demanding industrial service.
| S.No | Description | ASTM Test Method | Unit | Spec |
|---|---|---|---|---|
| 1 | Hardness | D 2240 | Shore A | 50 (Min) |
| 2 | Density | D 792 | gm/cc | 2.155±0.01 |
| 3 | Tensile Strength | D 412 | MPa | 25 (Min) |
| 4 | Elongation @ break | D 412 | % | 250 (Min) |
| 5 | Operating Temperatures | °C | -250°C to +250°C |
Novum P 02 is a non free flow, compression molding grade of virgin PTFE. The resin is molded under pressure and sintered into dense, uniform stock, then machined into finished sealing parts. A density of 2.155±0.01 gm/cc indicates a well consolidated structure. Low mold shrinkage helps keep dimensions consistent from one batch to the next, which matters when seals and backup rings must fit tight tolerances.
Strength and flexibility come together in this grade. A minimum tensile strength of 25 MPa and a minimum elongation at break of 250% give Novum P 02 the load capacity to resist extrusion and deformation in service. Good weldability allows it to be joined where the design needs it and its electrical and mechanical properties stay dependable across the full -250°C to +250°C range.
As a PTFE seals manufacturer, ISMAT supplies Novum P 02 as finished components made to your drawings and application conditions. Virgin PTFE offers low friction and broad chemical resistance, which makes this grade a practical choice for high pressure, high temperature and chemically aggressive service where reliable sealing and long service life are essential. Our team can help you check Novum P 02 against your media using the ISMAT Chemical Compatibility Guide.
ISMAT uses Novum P 02 to manufacture Virgin PTFE joint seals, backup rings, valve seats and seals. With 50 Shore A minimum hardness, 25 MPa minimum tensile strength and an operating range of -250°C to +250°C, these components are built for applications where high load capacity and dimensional consistency matter.
Hardness (Shore D): 50 (Min)
Temp Range: -250°C to 250°C
High Load Capacity
Good Electrical and Mechanical Properties
Good Weldability and Mold Filling
Oil & Gas
Chemical

Aerospace
Energy