Novum MOF 01 is a high‑performance 25% glass‑fiber and 5% molybdenum disulfide filled PTFE compound, engineered by ISMAT to provide excellent wear resistance, higher stiffness and significantly reduced deformation under load. With operating temperatures from –200°C to +260°C, Novum MOF 01 maintains strong chemical inertness while offering improved mechanical strength, higher elongation and higher dielectric strength compared to unfilled PTFE. The material also delivers better fatigue performance, making it ideal for high‑pressure, high‑wear applications such as valve seats, joint seals, backup rings and other critical sealing components where dimensional stability, long‑term reliability and consistent electrical insulation are essential.

Material Data - Novum MOF 01

Novum MOF 01 is a high‑performance PTFE‑based engineering plastic engineered by ISMAT using 25% glass fiber and 5% molybdenum disulfide filler, meticulously compounded for demanding sealing applications. Engineered with top‑grade raw materials and non‑free‑flow molding‑grade resin, Novum MOF 01 combines excellent mechanical strength, good wear resistance and low deformation under load, making it ideal for critical sealing components that must perform reliably under high pressure and extreme temperatures from –200°C to +260°C.

As a reinforced PTFE grade, Novum MOF 01 delivers higher hardness (Shore D 60–65) and a minimum tensile strength of 10 MPa, while maintaining good elongation (≥150%) and higher dielectric strength compared to standard PTFE compounds. Its enhanced tribological properties—lower friction against mating surfaces and improved fatigue performance—ensure longer service life in high‑cycle applications such as valve seats, joint seals and backup rings. The material also exhibits stable density (≥2.25 g/cm³), low creep and dimensional stability under continuous load, making Novum MOF 01 one of the preferred high‑performance plastics for high‑pressure, high‑wear industrial sealing environments.

By choosing Novum MOF 01, industries benefit from a lightweight, corrosion‑resistant engineering plastic that outperforms many traditional metal‑based solutions in terms of chemical inertness, weight reduction and maintenance‑free operation. Whether used in oil & gas, chemical processing or power generation, Novum MOF 01 is designed to deliver long‑lasting, reliable plastic material performance where strength, wear resistance and electrical insulation are critical requirements.

ISMAT leverages Novum MOF 01, a 25% glass‑fiber and 5% molybdenum disulfide filled PTFE compound, to produce high‑performance joint seals, backup rings, valve seats and other PTFE‑based seals designed for demanding high‑pressure and high‑wear applications. With a hardness of 60–65 Shore D, minimum tensile strength of 10 MPa, elongation ≥150% and an operating temperature range from –200°C to +260°C, Novum MOF 01 components offer lower deformation under load, higher elongation, higher dielectric strength and better fatigue performance compared to standard PTFE grades. These reinforced PTFE parts deliver robust mechanical reliability and long‑term sealing performance in critical oil & gas, chemical processing and industrial valve systems.